Water Jet Cutting Machine

TS-L3015

Product Specification

CNC Water Jet Cutting Machines (Gantry /Cantilever type)
(General technical characteriestics)
Table Model (as to ask)	Unit	TS-L2015	TS-L2515	TS-L3015	TS-L3020	TS-L4020	TS-L4030	TS-X1520
Cutting area	mm	2000 * 1500	2500 * 1500	3000 * 1500	3000 * 2000	4000 * 2000	4000 * 3000	1500 * 2000
Cutting accuracy	mm	+/- 0.1	+/- 0.1	+/- 0.1	+/- 0.1	+/- 0.1	+/- 0.1	+/- 0.1
Positioning accuracy	mm	+/- 0.05	+/- 0.05	+/- 0.05	+/- 0.05	+/- 0.05	+/- 0.05	+/- 0.05
Repeatability	mm	0,025	0,025	0,025	0,025	0,025	0,025	0,025
X,Y dry-run speed	m/min	0-15
Cutting speed	m/min	(as to detail material and thickness)
Motion for X.Y		HIWIN/TBI ballscrew and guideway ,mitsubishi servo motor to drive
Materials to cut		Copper ,steel ,rubber ,marble ,granite ,plastic ,glass ,aluminium etc (almost all kinds),thickness 0-120mm
Supply condition		Air ,water ,electricity ,abrasive(garnet),hydraulic oil
Max pump pressure	mPa	380/	380/	380/	380/	380/	380/	380/
Max pump pressure	mPa	410	410	410	410	410	410	410
Power	kW/ hp	30-37/	30-37/ 40-50	30-37/ 40-50	30-37/	30-37/	30-37/ 40-50	30-37/ 40-50
Power	kW/ hp	40- 50	30-37/ 40-50	30-37/ 40-50	40- 50	40- 50	30-37/ 40-50	30-37/ 40-50
Control by	Siemens	LOGO!	LOGO!	LOGO!	LOGO!	LOGO!	LOGO!	LOGO!
Inlet water supply:	mpa	>0.4	>0.4	>0.4	>0.4	>0.4	>0.4	>0.4
Software	Shanghai NAIKY software (NC STUDIO) / MITSUBISHI servo drive / ADVANTECH industrial computer

Machine Power	V	220/	220/	220/	220/	220/	220/	220/
(can be customized)	(3ph,50/60hz)	380/415	380/415	380/415	380/415	380/415	380/415	380/415

Prev：No more! Next：TS-L4020